Home›Products›HYLINE

Electro-hydraulic linear

HYLINE Linear Valve Actuators

Electric control, hydraulic force. 100 kgf to 100,000 kgf thrust, strokes up to 300 mm.

HYLINE combines the control simplicity of electric actuation with the high force of hydraulics, for modulating, emergency shutdown and isolating duties on linear valves. Feed it from a ring main, or build it as a compact self-contained unit with HYFLOW.

Get a priceDownload the brochures

HYLINE linear actuator with hydraulic control manifold and valve mounting assembly

100,000kgf

ThrustFrom 100 kgf, across four standard sizes.

300mm

StrokeUp to 12 inches, with custom mounting.

200mm/s

Fast-actingSpeeds from 2 mm/s to 200 mm/s.

300bar

Operating pressureProportional or fast-acting control.

Overview

Electric control with hydraulic force

HYLINE is an electro-hydraulic linear actuator system built for reliability, speed and precision in critical control. Proportional hydraulics give smooth, stable movement across the full stroke, and 4-20 mA and HART 7 feedback connect it to PLC and DCS systems.

Four standard sizes cover thrusts from 100 kgf to 100,000 kgf at up to 300 bar, with strokes up to 300 mm. Units can run from a hydraulic ring main or be built as compact, self-contained packages with an integrated HYFLOW pumping unit, so a remote valve needs no separate power unit.

Our established ranges already cover the vast majority of linear valve duties. Where yours is genuinely different, we engineer the mounting, controls or package around it.

Choose HYLINE for

  • Modulating control valves that need stable, precise positioning
  • Emergency shutdown and isolation, with spring or accumulator fail-safe
  • Remote and standalone valves, with a self-contained HYFLOW package
  • Sliding stem, globe and control valves

At a glance

HYLINE

Type
Electro-hydraulic linear actuator
Sizes
4 standard sizes
Thrust
100 to 100,000 kgf
Stroke
Up to 300 mm (12")
Pressure
Up to 300 bar
Speed
2 to 200 mm/s
Fail-safe
Spring-return or accumulator
Feedback
4-20 mA and HART 7

Self-contained by design

Ring main or local power

A central hydraulic power unit shares its downtime risk with every valve it feeds. Pairing HYLINE with HYFLOW gives each valve its own local power source, with less pipework and redundancy at the device. Where a ring main already exists, HYLINE runs from it just as well.

HYLINE self-contained linear actuator with a side-mounted HYFLOW power unit, shown in a factory setting
Self-contained HYLINE with a side-mounted HYFLOW 24 V DC pumping unit.
  • Ring mainFed from a central hydraulic supply at up to 300 bar
  • Self-containedAn integrated HYFLOW 24 V DC pumping unit, no separate HPU
  • Fail-safeSpring-return, or accumulators up to 4 litres

Advantages

Why choose a HYLINE

One scalable platform, from small precision control to heavy-duty isolation, with the materials and controls for offshore and process plant.

High-force actuation

Thrusts from 100 kgf to 100,000 kgf at pressures up to 300 bar.

Smooth modulating control

Proportional hydraulic response for accurate positioning and stable regulation.

Rapid response

Fast-acting variants move at up to 200 mm/s, reducing control lag.

Fail-safe options

Spring-return or accumulator fail-safe for ESD duties; accumulators also cut power use.

Integrated feedback

4-20 mA and HART 7 position feedback for PLC and DCS systems.

Modular mounting

A wide range of valve interfaces and bespoke brackets, with strokes up to 300 mm.

Compact self-contained

An integrated HYFLOW pumping unit removes the need for a separate HPU.

Offshore materials

Carbon steel offshore-coated cylinders as standard, with 316 stainless steel and 316L tubing and fittings.

Sealed

IP65, IP66 or IP68 builds, for ambient temperatures from -30 °C to +80 °C.

Technical data

HYLINE technical specifications

Specifications vary with the configuration. These are the ranges the HYLINE platform covers.

General data

PropertyHYLINE
TypeElectro-hydraulic linear actuator, double-acting or spring fail-safe
SizesFour standard sizes
Thrust100 kgf to 100,000 kgf
StrokeUp to 300 mm (12")
Operating pressureUp to 300 bar
Speed2 mm/s to 200 mm/s; fast-acting and proportional options
Fail-safeSpring-return or accumulator; accumulators up to 4 litres
FeedbackHYTRACK, 4-20 mA and HART 7
ControlProportional modulating or on-off; HYCONTROL closed-loop controller option
PowerHydraulic ring main, or self-contained with a HYFLOW 24 V DC pumping unit
CylindersCarbon steel, offshore coated, as standard; 316 stainless steel option
Manifold and tubingIntegrated 316L control manifold; 316L tubing and fittings; special materials available
Ingress protectionIP65, IP66 or IP68
Ambient temperature-30 °C to +80 °C
MountingCustom mounting to suit the valve
PaintOffshore paint systems, standard or custom

Example build. The size 2 HYLINE in our flyer has a 25 mm stroke and 2,000 kg thrust. Tell us the stroke, thrust and speed you need and we will confirm the size.

Sources: HYLINE features poster and HYLINE flyer, Advanced Actuators. Specifications vary with configuration; images are representative, and each unit is confirmed when you order.

Options

Configure your HYLINE

Start from one of four standard sizes, then choose the action, fail-safe, power and controls.

Double-acting or spring fail-safe

Powered both ways, or a spring returns the valve to its safe position.

Accumulator fail-safe

Accumulators up to 4 litres provide fail-safe stroking and help optimise power use.

Self-contained power

An integrated HYFLOW 24 V DC pumping unit for remote or standalone valves.

Fast-acting or proportional

Choose fast-acting variants for rapid shutdown, or proportional control for modulation.

Materials

316 stainless steel cylinders, 316L tubing and fittings, and special materials on request.

Paint and finish

Offshore paint systems, standard or to your specification.

Control and feedback

Feedback and closed-loop control

HYLINE takes our own instrumentation, so the actuator, feedback and positioner come from one supplier.

HYTRACK position transmitter in a stainless steel enclosure

Position transmitter, A-HR

HYTRACK

High-resolution position feedback for on-off and modulating valves.

  • 4-20 mA, 24 V DC two-wire loop powered, with HART 7
  • 12-bit contactless sensor and simple end-position calibration, 0 to 360°
  • Mechanical or proximity limit switch options
  • 316L stainless steel housing, IP66 and NEMA 4X
HYCONTROL valve positioner with display and a stainless steel Ex terminal box

Positioner, A-HC and A-HCR

HYCONTROL

Closed-loop positioning for modulating duties on hydraulic and pneumatic actuators.

  • 4-20 mA command and 4-20 mA feedback, with HART 7
  • Simple two-step calibration and manual operation
  • Stepping mode, fault relay outputs and performance monitoring
  • A-HCR has HYTRACK feedback built in

3D model

Take a HYLINE apart in 3D

Rotate, zoom and explode a representative HYLINE to see how the cylinder, manifold and controls fit together.

Load the 3D model

The model only loads when you ask for it.

Valves and applications

Where HYLINE works

HYLINE is built for modulating, emergency shutdown and isolating duties on linear valves across oil and gas and power.

Sliding stem valvesGlobe valvesControl valves

Hazardous area? Tell us the zone, gas group and temperature class, and we will confirm the certification for your exact unit.

Quarter-turn valve? See HYLINE-R Scotch yoke. For choke valves, see HYSTEP.

  • Oil and gas

    Modulating, ESD and isolation duties onshore, offshore and on floating production.

  • Power generation

    Precise flow control and regulation of process variables.

  • Remote and standalone sites

    Self-contained HYFLOW packages where there is no hydraulic supply.

Certification

Specified to suit your project

Certification depends on the specification, the components used and the area classification. Tell us what your project calls for and we will confirm the marks for your unit when we quote.

ISO 9001 certified quality managementISO 45001 certified health and safety managementEx mark for equipment for explosive atmospheresIECEx certification schemeUKCA markingINMETRO certification for BrazilIP66 ingress protection ratingIP68 ingress protection ratingNEMA 4X enclosure rating

Downloads

HYLINE downloads

  • HYLINE features poster

    PDF, 1.0 MB. The eight key features of the platform.

    Download

  • HYLINE flyer

    PDF, 0.4 MB. Technical features and performance ranges.

    Download

  • Advanced Actuators overview brochure

    PDF, 5.4 MB. The full actuator, power unit and instrumentation range.

    Download

Sizing help

Not sure which size?

Send the valve type, stroke and thrust, the duty and how it will be powered, and we will come back with the right size.

Already installed

Servicing and repairs

Overhaul, repair and spares for actuators in service, with commissioning support on site.

Size your HYLINE

Looking for a HYLINE or a price?

We just need three details.

Replacing one? Send the model code from the nameplate and a photo, and we will work from those.

  1. Valve

    Type and size, the stroke, and the thrust you need.

  2. Duty

    Modulating, emergency shutdown or isolation, the fail-safe direction and the speed.

  3. Power and site

    Ring main pressure or self-contained, and the area classification.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

HYLINE questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-actuators.com.

What is an electro-hydraulic actuator?

An actuator that uses electrical control signals to direct hydraulic power. HYLINE combines the control simplicity of electric systems with the high force of hydraulics, so it can position large linear valves precisely.

Ring main or self-contained: which do I need?

Where a hydraulic ring main exists, HYLINE can run from it. For remote or standalone valves, an integrated HYFLOW pumping unit makes HYLINE a compact, closed-loop system with no separate power unit.

How much thrust can HYLINE deliver?

Four standard sizes cover 100 kgf to 100,000 kgf at operating pressures up to 300 bar, with strokes up to 300 mm.

Can HYLINE fail safe?

Yes. Spring-return or accumulator fail-safe options return the valve to a safe position on power failure or in an emergency, which suits ESD and other critical duties.

Is HYLINE suitable for modulating control?

Yes. Proportional hydraulics give stable, smooth movement across the full stroke, and our HYCONTROL positioner closes the loop. Fast-acting variants move at up to 200 mm/s.

What feedback can I get?

Position feedback with 4-20 mA and HART 7 through our HYTRACK transmitter, compatible with PLC and DCS systems.

Which valves does HYLINE fit?

Sliding stem, globe and control valves, with custom mounting brackets and strokes up to 300 mm.

Is HYLINE suitable for hazardous areas?

Tell us the zone, gas group and temperature class, and we will confirm the certification for your exact unit before you order.

Back to top