Home›Products›HYSTEP

Discrete stepping actuator

HYSTEP Stepping Actuators

Hydraulic and pneumatic. Precise, discrete steps that hold under load, even without power.

HYSTEP turns electrical pulses into discrete mechanical steps for highly accurate positioning of choke and control valves. Two options keep specification simple: CORE is a cost-effective, standard solution for most applications; ADVANCED is fully customisable for specific duties, environments and performance requirements.

Get a priceDownload the brochures

HYSTEP discrete stepping actuator with top-mounted handwheel and mounting yoke

1.75million

Pecks cycle testedHigh-lifecycle stepping mechanisms.

15,000kgf

ThrustHYSTEP ADVANCED, with strokes up to 10 inches.

2options

Standard or tailoredCORE suits most jobs off the shelf. ADVANCED is tailored to your requirements.

IP68

Ingress protectionIP66 and IP68 test certified.

Overview

Discrete steps, held without power

A HYSTEP converts electrical pulses into discrete mechanical movements using two solenoids, for precise incremental control in modulation, motion and positioning. It holds position under high load even when external power is cut, and its low consumption suits remote sites.

Thousands of HYSTEP units are deployed worldwide, many in remote and challenging places: choke valves on production wellheads, flowlines, re-injection and gas lift, and on FPSO vessels. The latest generation adds a stronger, lighter housing, 6-bolt cylinders and a built-in mechanical indicator.

Our established ranges already cover the vast majority of choke and control valve duties. Where yours is genuinely different, HYSTEP ADVANCED is the platform we tailor to it.

Choose HYSTEP for

  • Choke valves on wellheads, flowlines, re-injection and gas lift
  • Precise incremental positioning and modulation
  • Remote and offshore sites, including FPSOs
  • Pneumatic (3 to 12 bar) or hydraulic (50 to 300 bar) supplies

At a glance

HYSTEP

Type
Discrete stepping actuator
Supply
Pneumatic 3-12 bar or hydraulic 50-300 bar
Versions
HYSTEP CORE and HYSTEP ADVANCED
Torque
225 Nm at 4 bar (CORE); 50 to 500 Nm (ADVANCED)
Steps per rev
18 (CORE); 12, 18 or 36 (ADVANCED)
Thrust
Up to 4,500 kgf (CORE); 15,000 kgf (ADVANCED)
Mounting
ISO 5211 and custom
Protection
IP66 and IP68

Proven in the field

Built for the choke valve

Choke valves need small, exact moves that stay put. HYSTEP steps the valve in discrete increments, holds position under load, and uses little energy doing it, which is why it is so widely used upstream.

HYSTEP stepping actuators on choke valve duty
HYSTEP stepping actuators on choke valve duty.
  • CORECarbon steel cylinders, ready to go off the shelf
  • ADVANCED316L, higher loads and more options
  • BothHydraulic or pneumatic, with HYTRACK feedback

Advantages

Why choose a HYSTEP

A modular, highly configurable stepping actuator, refined through continuous development and field testing.

New housing design

Stronger, lighter and more compact, for more flexible installation.

6-bolt cylinders

A robust 6-bolt integration for better sealing, strength and simpler maintenance.

Chemically bonded

Withstands up to 10,700 Nm, with six shear pins for protection under extreme conditions.

HYSOL pressure regulator

Compact, integrated pressure control that optimises performance and extends system life.

Detent unit

Mechanically locks each discrete step, removing over-travel for better precision and repeatability.

Simple transit screw

Enables or disables the actuator quickly for safe transport, commissioning and servicing.

HYTRACK feedback

Real-time, high-accuracy position feedback for modern control systems.

Mechanical indicator

A visible position check, even if electronic feedback is damaged or disconnected.

Full-metal construction

Machined throughout from metal components, built to last.

Technical data

HYSTEP technical specifications

CORE keeps specification simple with a cost-effective standard design for most applications. Choose ADVANCED when your duty calls for different materials, higher loads, longer strokes or bespoke controls and manual operation. Both use the same stepping principle and offer hydraulic or pneumatic supply.

HYSTEP CORE and HYSTEP ADVANCED compared

PropertyHYSTEP COREHYSTEP ADVANCED
CylindersCarbon steel316L stainless steel
Nominal torque225 Nm at 4 bar50 Nm to 500 Nm
Steps per revolution1812, 18 or 36
Nut boxCompactCompact or external high load
StrokeUp to 5"Up to 10"
ThrustUp to 4,500 kgfUp to 15,000 kgf
Manual operationCarbon steel, top mount316L, top or side mount
Instruments316L, Advanced Actuators standard316L, Advanced Actuators standard or customer specification
PaintingAdvanced Actuators offshore standardAdvanced Actuators offshore standard or custom
Best forA cost-effective, ready-to-go choice for most applications and projectsProjects needing bespoke performance or enhanced capabilities

Common to both

PropertyHYSTEP
SupplyPneumatic, 3 to 12 bar; or hydraulic, 50 to 300 bar
OperationElectrical pulses converted to discrete mechanical steps by two solenoids
HoldingHolds position under load when external power is cut
BodyHigh-strength cast spheroidal graphite iron
MountingISO 5211, with custom options
DurabilityChemically bonded to withstand 10,700 Nm, a safety factor of 21; six shear pins give 120% maximum torque resistance
Cycle testingMechanisms cycle tested to 1.75 million pecks
Ingress protectionIP66 and IP68, test certified
Ambient temperature-30 °C to +80 °C
Tubing and fittings316L, with special materials available

Sources: HYSTEP model comparison and features poster, July 2026, and HYSTEP flyer, Advanced Actuators; IP66 and IP68 test certificates. Specifications vary with configuration; each unit is confirmed when you order.

Mounting and manual operation

Four ways to fit your valve

Top or side handwheel, with yoke or direct valve mounting. These representative assemblies show how the layout can be selected around the valve and access for manual operation.

HYSTEP with top-mounted handwheel and mounting yoke on a representative choke valve

Yoke mounting

Top handwheel

Manual operation above the actuator, with a yoke connecting the actuator to the valve.

HYSTEP with side-mounted handwheel and mounting yoke on a representative choke valve

Yoke mounting

Side handwheel

Manual operation from the side, with the same yoke mounting arrangement.

HYSTEP with top-mounted handwheel and direct valve mounting

Direct mounting

Top handwheel

The actuator mounts directly to the valve, with the handwheel above the housing.

HYSTEP with side-mounted handwheel and direct valve mounting

Direct mounting

Side handwheel

Direct valve mounting with a side handwheel for a different access arrangement.

The final arrangement depends on the valve interface and the HYSTEP CORE or ADVANCED specification. Side-mounted manual operation is available on ADVANCED.

Options

Configure your HYSTEP

Choose CORE for a standard specification, or tailor ADVANCED around your valve and duty.

Hydraulic or pneumatic

Pneumatic from 3 to 12 bar, or hydraulic from 50 to 300 bar.

Steps per revolution

12, 18 or 36 on ADVANCED; 18 on CORE.

Nut box

Compact, or an external high-load nut box on ADVANCED.

Manual operation

A 316L manual override, top or side mounted on ADVANCED.

Pressure regulation

An integrated HYSOL pressure regulator.

Materials and paint

316L instruments to our standard or your specification, offshore paint systems, standard or custom.

Engineered configurations

Stacked units for demanding duties

HYSTEP units can also be supplied in a stacked arrangement for the most demanding duties. We engineer the complete package around the valve, available supply and operating requirements, and confirm the output rating for each application.

Control and feedback

Feedback and closed-loop control

HYSTEP takes our own instrumentation, so the actuator, feedback and positioner come from one supplier.

HYTRACK position transmitter in a stainless steel enclosure

Position transmitter, A-HR

HYTRACK

High-resolution position feedback for on-off and modulating valves.

  • 4-20 mA, 24 V DC two-wire loop powered, with HART 7
  • 12-bit contactless sensor and simple end-position calibration, 0 to 360°
  • Mechanical or proximity limit switch options
  • 316L stainless steel housing, IP66 and NEMA 4X
HYCONTROL valve positioner with display and a stainless steel Ex terminal box

Positioner, A-HC and A-HCR

HYCONTROL

Closed-loop positioning for modulating duties on hydraulic and pneumatic actuators.

  • 4-20 mA command and 4-20 mA feedback, with HART 7
  • Simple two-step calibration and manual operation
  • Stepping mode, fault relay outputs and performance monitoring
  • A-HCR has HYTRACK feedback built in

In detail

Take a closer look

Explore the complete assembly and the details that connect operation, mounting and position feedback. Select an image to view it larger.

HYSTEP discrete stepping actuator with top-mounted handwheel and mounting yoke, shown without the valve
HYSTEP with top-mounted handwheel and mounting yoke, shown without the valve.
HYSTEP top-mounted handwheel detail

Manual operation

Top-mounted handwheel shown. ADVANCED also offers a side-mounted arrangement to suit access around the valve.

HYSTEP yoke, coupling and valve mounting detail

Mounting and connection

A closer view of the yoke, coupling and valve interface. The final mounting arrangement is selected to suit the installation.

HYSTEP mechanical position indicator beside the HYCONTROL display

Position at a glance

The mechanical indicator provides a local position check alongside the HYCONTROL display.

3D model

Take a HYSTEP apart in 3D

Rotate, zoom and explode a representative HYSTEP to see the housing, cylinders, detent unit and indicator.

Load the 3D model

The model only loads when you ask for it.

Valves and applications

Where HYSTEP works

HYSTEP is widely used in the upstream oil and gas sector, especially on choke valves.

Choke valvesControl valvesWellheadsFlowlines

Hazardous area? Tell us the zone, gas group and temperature class, and we will confirm the certification for your exact unit.

Linear valve with continuous modulation? See HYLINE electro-hydraulic.

  • Production wellheads

    Precise choke control at the wellhead, onshore and offshore.

  • Flowlines and re-injection

    Incremental positioning on flowline, re-injection and gas lift chokes.

  • FPSO vessels

    Compact, sealed stepping actuators for floating production.

  • Remote and unmanned sites

    Low consumption and holding without power, for sites that are hard to reach.

Certification

Specified to suit your project

Certification depends on the specification, the components used and the area classification. Tell us what your project calls for and we will confirm the marks for your unit when we quote.

ISO 9001 certified quality managementISO 45001 certified health and safety managementEx mark for equipment for explosive atmospheresIECEx certification schemeUKCA markingINMETRO certification for BrazilIP66 ingress protection ratingIP68 ingress protection ratingNEMA 4X enclosure rating

Downloads

HYSTEP downloads

  • HYSTEP CORE and ADVANCED comparison

    PDF, 0.3 MB. Compare the standard CORE specification with the capabilities and options of ADVANCED.

    Download

  • HYSTEP flyer

    PDF, 0.4 MB. Technical features and performance ranges.

    Download

  • HYSTEP features poster

    PDF, 7.9 MB. The latest product developments in one view.

    Download

  • Advanced Actuators overview brochure

    PDF, 5.4 MB. The full actuator, power unit and instrumentation range.

    Download

Sizing help

Not sure which size?

Send the valve, the torque or thrust and stroke, and your supply, and we will recommend CORE or ADVANCED and the configuration.

Already installed

Servicing and repairs

Overhaul, repair and spares for actuators in service, with commissioning support on site.

Size your HYSTEP

Looking for a HYSTEP or a price?

We just need three details.

Replacing one? Send the model code from the nameplate and a photo, and we will work from those.

  1. Valve

    Type and size, and the torque or thrust it needs.

  2. Supply

    Pneumatic or hydraulic, and the pressure.

  3. Duty and site

    Feedback needs, materials and the area classification.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

HYSTEP questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-actuators.com.

What is a discrete stepping actuator?

An actuator that moves a valve in small, fixed steps. HYSTEP converts electrical pulses into discrete mechanical movements using two solenoids, giving precise incremental positioning that holds when the power is cut.

HYSTEP CORE or HYSTEP ADVANCED?

CORE is a cost-effective standard specification, ready to go for most applications. ADVANCED is tailored to specific requirements, with greater flexibility in materials, stepping, loads, stroke, instruments and manual operation. Both are available with hydraulic or pneumatic supply.

Hydraulic or pneumatic?

Both are available: pneumatic from 3 to 12 bar, or hydraulic from 50 to 300 bar.

Does HYSTEP hold position if power is lost?

Yes. It maintains position under high load even when external power is cut.

Which valves is HYSTEP used on?

Mainly choke valves in the upstream oil and gas sector: production wellheads, flowlines, re-injection, gas lift and FPSO vessels.

How durable is it?

Mechanisms are cycle tested to 1.75 million pecks, and chemically bonded components withstand 10,700 Nm, with six shear pins for extra protection.

What feedback is available?

Our HYTRACK transmitter gives 4-20 mA and HART position feedback, and every unit has a built-in mechanical indicator.

Is HYSTEP suitable for hazardous areas?

Tell us the zone, gas group and temperature class, and we will confirm the certification for your exact unit before you order.

Back to top