Home›Products›Instrumentation

Controls and instrumentation

Instrumentation and Controls

Feedback, control, switching and air preparation, built to work with our actuators.

Position transmitters, positioners, switches, motors, solenoid valves and filter regulators, most in 316L stainless steel and certified for hazardous areas. Supplied as part of a complete actuation package or as standalone components.

Get a priceData sheets and certificates

Stainless steel switch and solenoid valve from the Advanced Actuators instrumentation range

6ranges

One familyFeedback, control, switching, motors, solenoids and air.

316L

Stainless steelHousings built for offshore and corrosive sites.

Ex d

FlameproofATEX, UKEX and IECEx certificates, product by product.

IP68

Ingress protectionHYSWITCH; IP66 across the Ex d range.

Overview

Proven components, ready to integrate

Our instrumentation is designed to work across the Advanced Actuators range, so the actuator, its feedback, its control and its air or hydraulic switching can all come from one manufacturer.

HYTRACK and HYCONTROL handle feedback and closed-loop control. HYSWITCH, HYDRIVE and HYSOL are the building blocks inside complete packages, from temperature and position switching to motors and solenoid valves, and our stainless filter regulator prepares the air for pneumatic actuators.

Each product carries its own hazardous-area certificates, listed further down this page, so you can see exactly what applies before you specify.

Choose our instrumentation for

  • Complete actuator packages with matched feedback and control
  • Upgrades and spares for actuators already in service
  • Hazardous areas, with certificates for each product
  • Offshore, marine and corrosive sites that need 316L

The family

Six ranges

HYTRACK
4-20 mA and HART position transmitter
HYCONTROL
Closed-loop positioner and HPU controller
HYSWITCH
Temperature switches and proximity sensors
HYDRIVE
Brushless DC torque motors, 90 to 600 W
HYSOL
Ex d hydraulic and pneumatic solenoid valves
Filter regulator
316L air preparation

Control and feedback

Feedback and closed-loop control

Our two flagship instruments each have a page of their own, with full specifications, certificates and 3D models.

HYTRACK position transmitter in a stainless steel enclosure

Position transmitter, A-HR

HYTRACK

High-resolution position feedback for on-off and modulating valves.

  • 4-20 mA, 24 V DC two-wire loop powered, with HART 7
  • 12-bit contactless sensor and simple end-position calibration, 0 to 360°
  • Mechanical or proximity limit switch options
  • 316L stainless steel housing, IP66 and NEMA 4X
HYCONTROL valve positioner with display and a stainless steel Ex terminal box

Positioner, A-HC and A-HCR

HYCONTROL

Closed-loop positioning for modulating duties on hydraulic and pneumatic actuators.

  • 4-20 mA command and 4-20 mA feedback, with HART 7
  • Simple two-step calibration and manual operation
  • Stepping mode, fault relay outputs and performance monitoring
  • A-HCR has HYTRACK feedback built in

Air preparation

Stainless steel filter regulator

Stable outlet pressure and clean, dry air in one compact assembly. Built from 316L stainless steel for high-pressure service and corrosive or washdown environments, it protects the instruments and actuators downstream.

Typical uses include instrument air for hydraulic and pneumatic actuators, offshore, marine and chemical skids, food and pharmaceutical washdown areas, water treatment and mining, and analyser houses and instrument panels.

316L stainless steel filter regulator with gauge and drain

316L throughout

Body, bowl, internals and filter element in 316L stainless steel.

5 μm filtration

Standard, with a 40 μm element as an option.

Fine set adjustment

A precision, spring-loaded diaphragm keeps accuracy at low set points.

High flow

Up to 1,850 l/min with low pressure drop.

Cold and outdoor service

Operates down to -40 °C ambient, in harsh outdoor conditions.

Compact

Lightweight at 1,380 g, for vertical mounting.

Technical data

Instrumentation technical specifications

Key data for the building blocks. HYTRACK and HYCONTROL have full tables on their own pages.

HYSWITCH

PropertyA-TS temperature switchA-PX proximity sensor
TypeThermostat temperature switchReed proximity sensor
ContactsNormally closed; one or two switching temperaturesNormally open or normally closed, non-latching
Setting or range45, 50, 60 or 70 °C, ±5 °COperate distance 1 to 9 mm
Operating time1 s1 ms
Switching voltage24 V DC30 V DC
Power rating3 W3 W
Housing316L stainless steel, 30 mm AF x 74 mm316L stainless steel, 30 mm AF x 74 mm
Thread½ inch BSPP½ inch BSPP
Connection3 m or 5 m flying leads3 m or 5 m flying leads
Ingress protectionIP66 and IP68IP66 and IP68
Ambient temperature-40 °C to +70 °C-40 °C to +70 °C

HYDRIVE motor data

A-HM motors in 316L housings, IP66, with ambient ratings up to +105 °C depending on temperature class. Full motor details are available on request.

MotorA-HM-90A-HM-160A-HM-220A-HM-360A-HM-400A-HM-600
Power (W)90160220360400600
Voltage (V)242424241818
Nominal speed (rpm)2,5902,7202,4902,3401,7001,620
Nominal torque (mNm)4444577299531,3001,610
Stall torque (mNm)4,9407,9107,9107,80014,90014,900

HYSOL

PropertyHYSOL
Supply24 V DC
Pneumatic3 to 12 bar gas, 25 l/min, 3 W
Hydraulic50 to 300 bar fluid, 5 l/min, 6 W
Poppet valve cartridgeDirect operated, up to 10 l/min at up to 350 bar; 6 W to switch, 3.8 W to hold with integrated electronics
Versions2/2-way, or 3/2-way with transition function
Materials316L stainless steel option for wet, salty and corrosive sites
Cable entryM20 x 1.5 or ½ inch NPT
Minimum ambient-25 °C as standard; -40 °C and -60 °C options

Filter regulator

PropertyFilter regulator
ModelP10173001
Body, bowl and internals316L stainless steel
Ports¼ inch NPT female, in and out
Filtration5 μm standard; 40 μm option
RegulatorPiston
Maximum flow1,850 l/min
Set pressure0.5 to 20 kgf/cm²
Proof pressure30 kgf/cm²
DrainSemi-automatic; drains below 0.5 kgf/cm²
Bowl capacity105 cc
Temperature-10 °C to +70 °C fluid; -40 °C to +50 °C ambient
Weight1,380 g

Hazardous-area certificates

Certificates held for each Ex d range. "Ask us" means none is in our library for that scheme: tell us your requirement and we will confirm.

SchemeHYTRACK, HYCONTROL, HYDRIVEHYSWITCHHYSOL
ATEXExVeritas 22 ATEX 1354 XExVeritas 22 ATEX 1346 XBVS 22 ATEX E 016 X
UKEXExVeritas 22 UKEX 1355 XExVeritas 22 UKEX 1347 XAsk us
IECExIECEx EXV 22.0040XIECEx EXV 22.0039XIECEx BVS 22.0027X
INMETROCPEx 24.1587 XAsk usAsk us
Gas markingEx db IIC T6 to T4 GbEx db IIC T6 GbEx db IIC T6 or T4 Gb; Ex db I Mb (mining)
Dust markingEx tb IIIC T85 °C to T135 °C DbEx tb IIIC T85 °C DbEx tb IIIC T80 °C or T130 °C Db

Sources: A-TS, A-PX and A-HM data sheets, HYSOL poppet valve data sheet, controls flyer and filter regulator data sheet, Advanced Actuators; ExVeritas, IECEx, INMETRO and DEKRA certificates. Specifications vary with configuration; each unit is confirmed when you order.

Downloads

Data sheets and certificates

  • Controls and instrumentation flyer

    PDF, 1.6 MB. HYCONTROL, HYTRACK, HYSWITCH, HYDRIVE and HYSOL.

    Download

  • HYTRACK data sheet

    PDF, 1.6 MB. Position transmitter specifications and markings.

    Download

  • HYCONTROL data sheet

    PDF, 2.0 MB. Positioner specifications and markings.

    Download

  • Technical library

    Every data sheet, manual, declaration and Ex certificate, including HYSWITCH, HYDRIVE, HYSOL and the filter regulator.

    Open

Selection help

Not sure which you need?

Tell us the actuator or circuit, the signals or settings and the area classification, and we will recommend the instruments.

Already installed

Servicing and repairs

Overhaul, repair and spares for actuators and instruments in service, with commissioning support on site.

Specify your instruments

Looking for an instrument or a price?

We just need three details.

Replacing one? Send the model code from the label and a photo, and we will work from those.

  1. Product

    Which instrument, and how many.

  2. Duty

    The actuator or circuit it serves, and the signals, pressures or settings.

  3. Site

    Area classification, cable entries and materials.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Instrumentation questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-actuators.com.

Can I buy the instruments on their own?

Yes. They are supplied fitted to our actuator packages or as standalone components for other actuators and circuits.

Which hazardous-area certificates apply?

Each product has its own certificates, listed in the table on this page. HYTRACK, HYCONTROL and HYDRIVE share the A-H* flameproof enclosure certificates; HYSWITCH and HYSOL have their own. Tell us your zone, gas group and temperature class and we will confirm the certification for your exact unit.

What is the difference between HYTRACK and HYCONTROL?

HYTRACK reports valve position as a 4-20 mA signal. HYCONTROL controls the valve to a 4-20 mA command, and the A-HCR version has HYTRACK built in. See HYTRACK and HYCONTROL.

Which temperatures can HYSWITCH detect?

The A-TS temperature switch is set at 45, 50, 60 or 70 °C, with a tolerance of ±5 °C, and a double version switches at two temperatures.

What sizes does HYDRIVE come in?

Six: 90, 160, 220, 360, 400 and 600 W, with nominal torques from 444 to 1,610 mNm. The full motor data is in the table on this page.

Is the filter regulator suitable for corrosive sites?

Yes. The body, bowl, internals and filter element are 316L stainless steel, for high-pressure service and corrosive or washdown environments.

Where are the data sheets and certificates?

In our technical library, which holds the data sheets, manuals, declarations and Ex certificates for every range.

Back to top