Home›Products›HYLINE-R

Quarter-turn Scotch yoke

HYLINE-R Scotch Yoke Actuators

Hydraulic or pneumatic. Double-acting or spring-return fail-safe. Up to 16,350 Nm.

HYLINE-R turns ball, plug and butterfly valves with a balanced Scotch yoke torque curve, strongest at the ends of the stroke where valves break away and reseat. Six sizes, each double-acting or spring-return, with ISO 5211 and NAMUR interfaces for the mounting and controls your valve needs.

Get a priceDownload the data sheets

HYLINE-R hydraulic spring-return Scotch yoke actuator mounted on a ball valve

16,350Nm

Peak double-acting torqueAt the stroke ends on the largest size, 4 bar air.

6sizes

Double-acting or spring-returnEach spring-return size comes fail-closed or fail-open.

2supplies

Hydraulic or pneumaticOr self-contained hydraulic with HYFLOW.

IP67

Ingress protectionO-ring sealed against dust and water.

Overview

Quarter-turn torque where the valve needs it

A Scotch yoke turns the straight push of a piston into a quarter turn through a slotted yoke. The lever arm is longest at each end of the stroke, so the torque curve is U-shaped: highest at 0° and 90°, where a seated valve needs the most effort to break away and to reseat, and lower through mid-stroke, where the valve moves freely.

HYLINE-R puts that mechanism in a compact, modular package. Choose a hydraulic or pneumatic supply, then double-acting or spring-return, in six sizes. Springs sit in a sealed cartridge, a low-friction slider block spreads the contact loads across the yoke, and standard interfaces take the mounting kits, switchboxes and positioners your valve needs.

Our established ranges already cover the vast majority of quarter-turn duties. Where yours is genuinely different, we engineer the mounting, controls or package around it.

Choose HYLINE-R for

  • Isolation and on-off duties on ball, plug and butterfly valves
  • Fail-safe duties that must close or open when supply is lost
  • Sites with compressed air, a hydraulic supply, or neither, using HYFLOW
  • Modulating control with HYCONTROL and position feedback with HYTRACK

At a glance

HYLINE-R

Mechanism
Symmetrical Scotch yoke, 90° rotation
Supply
Hydraulic fluid or compressed air
Action
Double-acting (fail-fixed) or spring-return (fail-closed or fail-open)
Sizes
Six, on T1, T2, T4 and T5 frames
Torque
1,300 to 16,350 Nm at the stroke ends, double-acting, 4 bar air
Protection
IP67, O-ring sealed
Interfaces
ISO 5211 valve mounting, NAMUR accessory mounting
Travel stops
External and adjustable

Balanced torque

Strongest at breakaway and reseating

The symmetrical yoke gives the same U-shaped curve in both directions: most torque at each end of the stroke, where the valve breaks away and reseats, and less through mid-stroke, where it moves freely. Every size follows the same shape, up to 16,350 Nm.

Scotch yoke torque curve: highest at 0 and 90 degrees, lowest at mid-strokeHighestLowestHighest0° closed45°90° openOutput torque
Indicative shape of the Scotch yoke torque curve, the same for every HYLINE-R size. Size from the full tables below, with your valve's breakaway, running and reseating torques and a suitable safety factor.
  • 0°Closed: the valve breaks away when opening and reseats when closing
  • 45°Mid-stroke: the valve is moving freely and needs least torque
  • 90°Open: the valve breaks away when it is closed again

Advantages

Why choose a HYLINE-R

Every HYLINE-R is built around a symmetrical yoke housing. A cylinder sits on one side, and on the other either a second cylinder for double-acting units or a sealed spring cartridge for spring-return units.

Exploded view of a hydraulic HYLINE-R spring-return actuator showing the spring cartridge, yoke housing and cylinder

Balanced torque profile

Peak output at both ends of the 90° stroke, matching the way quarter-turn valves load an actuator at breakaway and reseating.

Sealed spring cartridge

Springs are fully contained in a sealed cartridge, so installation, removal and maintenance are safer.

Compact spring module

Keeps the actuator envelope and weight down while holding the torque needed for dependable fail-safe operation.

Low-friction slider block

Spreads contact loads across the yoke, reducing localised stress and wear over repeated cycles for a longer cycle life.

IP67 sealing

O-ring seals protect the internal parts against dust and water ingress in exposed and demanding sites.

Adjustable travel stops

Externally accessible stops set precise open and closed positions, for reliable shut-off without unnecessary load on the valve seat.

NAMUR mounting

Standard NAMUR interfaces simplify fitting switchboxes, positioners and other control accessories.

Internal tie rods

On pneumatic units, internal tie rods hold cylinder alignment and take the operating loads, helping prevent uneven piston and seal wear.

High torque density

On hydraulic units, a compact cylinder gives substantial torque from a smaller envelope, where space is tight.

Technical data

HYLINE-R technical specifications

Six sizes, each double-acting or spring-return. Pneumatic torque figures are from the HYLINE-R pneumatic data sheet, with a 4 bar air supply.

Pneumatic HYLINE-R modules shown apart: spring cartridge or second air cylinder, yoke housing and air cylinder

General data

PropertyHYLINE-R
TypeQuarter-turn Scotch yoke actuator, 90° rotation
SupplyPneumatic (compressed air) or hydraulic
Double-actingPowered in both directions, fail-fixed on loss of supply
Spring-returnPowered one way, spring return to a fail-closed or fail-open position
SizesSix, across frames T1, T2, T4 and T5 (model codes below)
Pneumatic rating basis4 bar air supply
Ingress protectionIP67, O-ring seals
Valve mountingISO 5211 compatible, with custom mounting kits available
Accessory mountingNAMUR interfaces for switchboxes, positioners and other controls
Travel stopsExternally accessible and adjustable, open and closed
Position indicatorMechanical indicator, optional
Pneumatic hardwareSolenoid valves, filter regulator and quick exhaust valves supplied where required
Hydraulic optionIntegrated HYFLOW unit for a self-contained package

Pneumatic double-acting torque

Air operated in both directions. Torque at 4 bar.

ModelAction0° Nm45° Nm90° Nm
E-R-T1-S-201DADouble-acting, fail-fixed1,3007001,300
E-R-T1-S-251DADouble-acting, fail-fixed2,0501,1002,050
E-R-T2-S-301DADouble-acting, fail-fixed3,7502,0503,750
E-R-T4-S-401DADouble-acting, fail-fixed9,3505,0509,350
E-R-T4-S-451DADouble-acting, fail-fixed11,9006,40011,900
E-R-T5-S-451DADouble-acting, fail-fixed16,3508,80016,350

Pneumatic spring-return torque

Air operated one way with spring return. Spring torque is given at the fail position. Net torque is the air torque at 0°, 45° and 90° with a 4 bar supply, less the opposing spring torque.

ModelFail positionSpring Nm at fail positionNet 0° NmNet 45° NmNet 90° Nm
E-R-T1-S-201SRC4Fail-closed500822358501
E-R-T1-S-201SRO4Fail-open500501358822
E-R-T1-S-251SRC4Fail-closed6261,4636821,061
E-R-T1-S-251SRO4Fail-open6261,0616821,463
E-R-T2-S-301SRC5Fail-closed1,4852,3049891,351
E-R-T2-S-301SRO5Fail-open1,4851,3519892,304
E-R-T4-S-401SRC4Fail-closed3,5463,1931,102911
E-R-T4-S-401SRO4Fail-open3,5469111,1023,193
E-R-T4-S-451SRC4Fail-closed4,4327,4803,2714,627
E-R-T4-S-451SRO4Fail-open4,4324,6273,2717,480
E-R-T5-S-451SRC4Fail-closed6,19210,1784,4226,191
E-R-T5-S-451SRO4Fail-open6,1926,1914,42210,178

Hydraulic models

Hydraulic HYLINE-R comes in the same six sizes, double-acting or spring-return, with model codes starting E-RH. Torque depends on your supply pressure: tell us the pressure and the valve torques and we will send the figures for your duty.

Source: HYLINE-R pneumatic data sheet, Advanced Actuators, October 2026 issue. Images are representative. The final model number, certification and configuration are confirmed when you order.

Options

Configurations and options

Choose the action, then the power arrangement. The four hydraulic packages below are shown on representative ball valves; pneumatic double-acting and spring-return versions are also available.

HYLINE-R hydraulic spring-return Scotch yoke actuator mounted on a ball valve

Spring-return · ring main

Site hydraulic supply

A hydraulic supply strokes the valve one way; the sealed spring cartridge returns it to its specified safe position.

HYLINE-R hydraulic spring-return actuator with integrated HYFLOW power mounted on a ball valve

Spring-return · self-contained

Local HYFLOW power

The actuator and hydraulic power sit together at the valve, with spring-return fail-safe operation.

HYLINE-R hydraulic double-acting Scotch yoke actuator mounted on a ball valve

Double-acting · ring main

Site hydraulic supply

Hydraulic pressure powers both opening and closing, for installations with a central hydraulic supply. Hydraulic manifold not shown.

HYLINE-R hydraulic double-acting actuator with integrated HYFLOW power mounted on a ball valve

Double-acting · self-contained

Local HYFLOW power

An integrated HYFLOW unit powers double-acting operation, without a separate hydraulic power unit.

Hydraulic or pneumatic

Hydraulic for high torque from a compact envelope; pneumatic where a constant supply of compressed air is available.

Self-contained hydraulic

An optional integrated HYFLOW unit removes the need for an external hydraulic supply.

Pneumatic control package

Solenoid valves, filter regulator and quick exhaust valves supplied with the actuator where required. See instrumentation and controls.

Mounting kits

An ISO 5211 compatible interface, with custom mounting kits engineered for your valve.

Position indicator

An optional mechanical position indicator shows open and closed at a glance.

Feedback and positioning

HYTRACK or HYCONTROL on the NAMUR interface for feedback and closed-loop control.

Control and feedback

Ready for feedback and positioning

NAMUR interfaces on every HYLINE-R take our own instrumentation, so the actuator, feedback and positioner can all come from one supplier.

HYTRACK position transmitter in a stainless steel enclosure

Position transmitter, A-HR

HYTRACK

High-resolution position feedback for on-off and modulating valves.

  • 4-20 mA, 24 V DC two-wire loop powered, with HART 7
  • 12-bit contactless sensor and simple end-position calibration, 0 to 360°
  • Mechanical or proximity limit switch options
  • 316L stainless steel housing, IP66 and NEMA 4X
HYCONTROL valve positioner with display and a stainless steel Ex terminal box

Positioner, A-HC and A-HCR

HYCONTROL

Closed-loop positioning for modulating duties on hydraulic and pneumatic actuators.

  • 4-20 mA command and 4-20 mA feedback, with HART 7
  • Simple two-step calibration and manual operation
  • Stepping mode, fault relay outputs and performance monitoring
  • A-HCR has HYTRACK feedback built in

3D model

Take a HYLINE-R apart in 3D

Rotate, zoom and explode a representative HYLINE-R to see how the yoke, slider block, cylinder and spring cartridge fit together, with notes on the key features.

Load the 3D model

The model is about 15 MB, so it only loads when you ask for it.

Valves and applications

Where HYLINE-R works

HYLINE-R is built for quarter-turn isolation and control duties where dependable torque, fail-safe action and long service life matter.

Ball valvesPlug valvesButterfly valves

Hazardous area? Tell us the zone, gas group and temperature class, and we will confirm the certification for your exact unit.

Not sure it is the right fit? For smaller pneumatic valves, HYLINE-K rack and pinion may suit. With no air or hydraulic supply, see the HYLINE-E electric range.

  • Oil and gas

    Isolation and fail-safe duties on production, process and utility lines, onshore and offshore.

  • Chemical processing

    On-off and fail-safe isolation where a valve must reach a safe position on loss of supply.

  • Water and wastewater

    Large quarter-turn valves at treatment works, pumping stations and on distribution networks.

  • Power generation

    Isolation duties on cooling water, fuel and auxiliary systems.

  • Offshore and marine

    Compact, sealed units for exposed decks and space-limited skids.

Certification

Specified to suit your project

Certification depends on the specification, the components used and the area classification. Tell us what your project calls for and we will confirm the marks for your unit when we quote.

ISO 9001 certified quality managementISO 45001 certified health and safety managementEx mark for equipment for explosive atmospheresIECEx certification schemeUKCA markingINMETRO certification for BrazilIP66 ingress protection ratingIP68 ingress protection ratingNEMA 4X enclosure rating

Downloads

HYLINE-R downloads

  • HYLINE-R pneumatic data sheet

    PDF, 1.2 MB. Features, double-acting and spring-return torque tables at 4 bar.

    Download

  • HYLINE-R hydraulic data sheet

    PDF, 1.3 MB. Features, double-acting and spring-return torque tables at 100 bar nominal pressure.

    Download

  • HYLINE-R pneumatic features sheet

    PDF, 5.8 MB. One-page overview of the pneumatic range.

    Download

  • HYLINE-R hydraulic features sheet

    PDF, 5.2 MB. One-page overview, including the HYFLOW option.

    Download

  • Advanced Actuators overview brochure

    PDF, 5.4 MB. The full actuator, power unit and instrumentation range.

    Download

Sizing help

Not sure which size?

Send the valve type, size and torques, and we will come back with the right size and its torque at your supply.

Already installed

Servicing and repairs

Overhaul, repair and spares for actuators in service, with commissioning support on site.

Size your HYLINE-R

Looking for a HYLINE-R or a price?

We just need three details.

Replacing one? Send the model code from the nameplate and a photo, and we will work from those.

  1. Valve

    Type and size, with its breakaway, running and reseating torques if you have them.

  2. Supply

    Air or hydraulic, and the pressure. No supply? We will look at HYFLOW or HYLINE-E.

  3. Duty

    Double-acting or spring-return, the fail position, on-off or modulating, and the area classification.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

HYLINE-R questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-actuators.com.

What is a Scotch yoke actuator?

A quarter-turn actuator that converts the straight-line force of a piston into rotation through a slotted yoke. Its torque is highest at each end of the 90° stroke and lower in the middle, which suits the breakaway and reseating torques of ball, plug and butterfly valves.

Scotch yoke or rack and pinion: which do I need?

A rack and pinion gives a broadly even torque through the stroke and is often chosen for smaller valves. A Scotch yoke gives more torque at the ends of the stroke, which suits larger, high-torque quarter-turn valves. We offer both: HYLINE-R Scotch yoke and HYLINE-K rack and pinion.

How much torque does HYLINE-R give?

On a 4 bar air supply, double-acting models give 1,300 Nm to 16,350 Nm at the ends of the stroke and 700 Nm to 8,800 Nm at mid-stroke. On spring-return models the spring gives 500 Nm to 6,192 Nm at the fail position; the tables on this page list the net air torque for every model.

Can HYLINE-R fail safe?

Yes. Spring-return models drive the valve to its safe position when supply is lost, fail-closed or fail-open, with the springs held in a sealed cartridge. Double-acting models are fail-fixed: they stay where they are.

Hydraulic or pneumatic: which should I choose?

Pneumatic suits sites with a constant supply of compressed air, and we supply the solenoid valves, filter regulator and quick exhaust valves where they are needed. Hydraulic gives high torque from a compact envelope, and with an integrated HYFLOW unit it needs no external hydraulic supply.

Will HYLINE-R fit my valve?

The valve interface is ISO 5211 compatible, and we supply custom mounting kits where a valve needs one. Send us the valve type, size and top-works details, or a drawing if you have one.

Can I add a positioner or limit switches?

Yes. NAMUR interfaces take switchboxes, positioners and other control accessories. Our HYTRACK transmitter gives 4-20 mA position feedback with HART, and HYCONTROL adds closed-loop positioning for modulating duties.

Is HYLINE-R suitable for hazardous areas?

Tell us the zone, gas group and temperature class, and we will confirm the certification for your exact unit before you order.

Back to top