Home›Products›HYFLOW

Hydraulic power unit

HYFLOW Smart Hydraulic Pumping Units

24 V DC, closed-loop and compact. 0.4 to 3 l/min at 70 to 207 bar.

HYFLOW pairs a proportional control system with a brushless DC smart motor in a rugged 316L stainless steel housing, giving a hydraulic actuator its own accurate, local power supply. No central power unit and no long pipe runs.

Get a priceDownload the data sheet

HYFLOW smart hydraulic pumping unit in a stainless steel housing, with manual pump handle

<1W

Steady-state powerUltra-low consumption while holding position.

207bar

PressureFrom 70 bar (1,000 psi) to 207 bar (3,000 psi).

3l/min

FlowFrom 0.4 l/min (0.1 GPM) to 3 l/min (0.8 GPM).

IP66

And NEMA 4XSealed for washdown and outdoor use.

Overview

Local hydraulic power, at the actuator

HYFLOW is a hydraulic micro pumping unit. A 24 V DC smart brushless motor and proportional control give dynamic flow and pressure control in a closed loop, with 4-20 mA and HART 7 communication.

Mounted with the actuator, HYFLOW does away with a separate hydraulic power unit, so remote and standalone valves need only a 24 V DC supply. It suits any hydraulic actuator, and it is the self-contained option for HYLINE and HYLINE-R.

Our established ranges already cover the vast majority of duties. Where yours is genuinely different, we tailor the stroke length, control type or fail-safe function to it.

Choose HYFLOW for

  • HYLINE and HYLINE-R self-contained packages
  • Remote and standalone valves with only a 24 V DC supply
  • Replacing a shared power unit with local power at each valve
  • Precision instrumentation control and lubrication systems

At a glance

HYFLOW

Type
Hydraulic micro pumping unit
Motor
24 V DC smart brushless, 400 W
Supply current
2 A to 20 A
Steady state
Below 1 W
Flow
0.4 to 3 l/min
Pressure
70 to 207 bar
Housing
316L stainless steel
Protection
IP66, NEMA 4X

Self-contained by design

One power unit per valve

A central hydraulic power unit shares its downtime risk with every valve it feeds. With HYFLOW, each actuator has its own local power source, with less pipework and redundancy at the device.

HYLINE self-contained linear actuator with a side-mounted HYFLOW power unit, shown in a factory setting
HYFLOW integrated with a HYLINE linear actuator: a compact, closed-loop actuation package.
  • 24 V DCSmart brushless motor, 400 W
  • Closed loopDynamic flow and pressure control, maintenance free
  • 4-20 mAWith HART 7, for PLC and DCS systems

Advantages

Why choose HYFLOW

Compact, accurate hydraulic power that installs with the actuator and runs from 24 V DC.

Exploded view of a HYFLOW hydraulic pumping unit, showing its internal components

Flow-optimised design

Built for smooth, consistent flow regulation in fluid control systems.

Closed loop

Proportional control and a smart brushless motor, closed loop and maintenance free.

Ultra-low standby power

Below 1 W in steady state while holding position.

Wide compatibility

Standardised mounting and coupling options for a range of valves and fittings.

Rugged housing

316L stainless steel, sealed to IP66 and NEMA 4X against water and contamination.

Feedback ready

Takes position indicators and smart sensors, with integrated sensor options.

Fail-safe compatible

Works with fail-safe actuators, and can be configured for a fail-safe function.

Custom configurations

Tailored to the stroke length, control type or fail-safe function you need.

Wide temperature range

Rated for ambient temperatures from -40 °C to +80 °C.

Technical data

HYFLOW technical specifications

Specifications vary with the configuration. These are the ranges HYFLOW covers.

General data

PropertyHYFLOW
TypeHydraulic micro pumping unit with proportional control
Motor24 V DC smart brushless motor, 400 W
Supply current2 A to 20 A; confirm starting and running current for the specified duty
Steady-state consumptionBelow 1 W
Flow rate0.4 l/min (0.1 GPM) to 3 l/min (0.8 GPM)
Pressure70 bar (1,000 psi) to 207 bar (3,000 psi)
ControlClosed loop, dynamic flow and pressure control
Communication4-20 mA and HART 7
Housing316L stainless steel
Ingress protectionIP66, NEMA 4X
Ambient temperature-40 °C to +80 °C
OptionsHYTRACK position feedback; HYCONTROL closed-loop position controller; integrated sensors

Sources: HYFLOW data sheet and features poster, Advanced Actuators. Specifications vary with configuration; images are representative, and each unit is confirmed when you order.

Options

Configure your HYFLOW

Each unit is sized to the actuator it powers, then fitted with the controls and feedback the duty needs.

Motor

HYFLOW uses a 400 W motor. The hydraulic package is matched to the required flow and pressure.

Fail-safe function

Configured for fail-safe duty, or paired with a spring or accumulator fail-safe actuator.

Position feedback

HYTRACK, 4-20 mA and HART 7.

Closed-loop positioning

HYCONTROL positioner for modulating duties.

Integrated sensors

Pressure and other sensor options built in.

Actuator package

Supplied on its own, or built into a HYLINE or HYLINE-R package.

Control and feedback

Feedback and closed-loop control

HYFLOW works with our own instrumentation, so the power unit, actuator, feedback and positioner come from one supplier.

HYTRACK position transmitter in a stainless steel enclosure

Position transmitter, A-HR

HYTRACK

High-resolution position feedback for on-off and modulating valves.

  • 4-20 mA, 24 V DC two-wire loop powered, with HART 7
  • 12-bit contactless sensor and simple end-position calibration, 0 to 360°
  • Mechanical or proximity limit switch options
  • 316L stainless steel housing, IP66 and NEMA 4X
HYCONTROL valve positioner with display and a stainless steel Ex terminal box

Positioner, A-HC and A-HCR

HYCONTROL

Closed-loop positioning for modulating duties on hydraulic and pneumatic actuators.

  • 4-20 mA command and 4-20 mA feedback, with HART 7
  • Simple two-step calibration and manual operation
  • Stepping mode, fault relay outputs and performance monitoring
  • A-HCR has HYTRACK feedback built in

3D model

See inside HYFLOW in 3D

Rotate, zoom and explode a representative HYFLOW to see how the motor, pump and housing fit together.

Load the 3D model

The model only loads when you ask for it.

Valves and applications

Where HYFLOW works

HYFLOW provides hydraulic power for actuators, precision instrumentation control and lubrication systems.

Linear actuatorsQuarter-turn actuatorsInstrumentationLubrication systems

Hazardous area? Tell us the zone, gas group and temperature class, and we will confirm the certification for your exact unit.

Need the actuator too? See HYLINE for linear valves and HYLINE-R for quarter-turn valves.

  • Oil and gas

    Local power for actuators on remote wellheads, platforms and pipelines.

  • Chemical processing

    Accurate, sealed hydraulic power in process areas.

  • Manufacturing

    Compact power for automated hydraulic equipment.

  • Mining

    Rugged, self-contained power for remote installations.

Certification

Specified to suit your project

Certification depends on the specification, the components used and the area classification. Tell us what your project calls for and we will confirm the marks for your unit when we quote.

ISO 9001 certified quality managementISO 45001 certified health and safety managementEx mark for equipment for explosive atmospheresIECEx certification schemeUKCA markingINMETRO certification for BrazilIP66 ingress protection ratingIP68 ingress protection ratingNEMA 4X enclosure rating

Downloads

HYFLOW downloads

  • HYFLOW data sheet

    PDF, 0.4 MB. Technical features and performance ranges.

    Download

  • HYFLOW features poster

    PDF, 8.2 MB. The key features in one view.

    Download

  • Advanced Actuators overview brochure

    PDF, 5.4 MB. The full actuator, power unit and instrumentation range.

    Download

Sizing help

Not sure which size?

Send the actuator, the working pressure and stroke time, and your 24 V DC supply, and we will specify the unit.

Already installed

Servicing and repairs

Overhaul, repair and spares for actuators in service, with commissioning support on site.

Size your HYFLOW

Looking for a HYFLOW or a price?

We just need three details.

Replacing one? Send the model code from the nameplate and a photo, and we will work from those.

  1. Actuator

    Type and size, and the swept volume or flow it needs.

  2. Pressure and speed

    The working pressure and the stroke time you want.

  3. Site

    The 24 V DC supply available, fail-safe needs and the area classification.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

HYFLOW questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-actuators.com.

What is HYFLOW?

A compact hydraulic pumping unit that mounts with the actuator. A 24 V DC brushless smart motor and proportional control give the actuator its own closed-loop hydraulic power, with no separate power unit.

How much power does HYFLOW need?

A 24 V DC supply. HYFLOW uses a 400 W motor and consumes below 1 W in steady state. Confirm starting and running current for the specified duty.

What flow and pressure does it give?

From 0.4 l/min (0.1 GPM) to 3 l/min (0.8 GPM), at 70 bar (1,000 psi) to 207 bar (3,000 psi).

Which actuators can it power?

Any hydraulic actuator. It is the self-contained option for HYLINE and HYLINE-R.

Can HYFLOW work with a fail-safe actuator?

Yes. It is compatible with fail-safe actuators and can be configured with a fail-safe function.

Does it need maintenance?

The data sheet describes HYFLOW as closed loop and maintenance free. Seal replacement and spares are covered in its service manual, and our after-sales team can help.

How does it connect to my control system?

Through 4-20 mA and HART 7, with HYTRACK feedback and HYCONTROL positioning as options.

Is HYFLOW suitable for hazardous areas?

Tell us the zone, gas group and temperature class, and we will confirm the certification for your exact unit before you order.

Back to top