Discrete stepping actuator
Hydraulic and pneumatic. Precise, discrete steps that hold under load, even without power.
HYSTEP turns electrical pulses into discrete mechanical steps for highly accurate positioning of choke and control valves. Two options keep specification simple: CORE is a cost-effective, standard solution for most applications; ADVANCED is fully customisable for specific duties, environments and performance requirements.

1.75million
Pecks cycle testedHigh-lifecycle stepping mechanisms.
15,000kgf
ThrustHYSTEP ADVANCED, with strokes up to 10 inches.
2options
Standard or tailoredCORE suits most jobs off the shelf. ADVANCED is tailored to your requirements.
IP68
Ingress protectionIP66 and IP68 test certified.
Overview
A HYSTEP converts electrical pulses into discrete mechanical movements using two solenoids, for precise incremental control in modulation, motion and positioning. It holds position under high load even when external power is cut, and its low consumption suits remote sites.
Thousands of HYSTEP units are deployed worldwide, many in remote and challenging places: choke valves on production wellheads, flowlines, re-injection and gas lift, and on FPSO vessels. The latest generation adds a stronger, lighter housing, 6-bolt cylinders and a built-in mechanical indicator.
Our established ranges already cover the vast majority of choke and control valve duties. Where yours is genuinely different, HYSTEP ADVANCED is the platform we tailor to it.
At a glance
Proven in the field
Choke valves need small, exact moves that stay put. HYSTEP steps the valve in discrete increments, holds position under load, and uses little energy doing it, which is why it is so widely used upstream.

Advantages
A modular, highly configurable stepping actuator, refined through continuous development and field testing.
Stronger, lighter and more compact, for more flexible installation.
A robust 6-bolt integration for better sealing, strength and simpler maintenance.
Withstands up to 10,700 Nm, with six shear pins for protection under extreme conditions.
Compact, integrated pressure control that optimises performance and extends system life.
Mechanically locks each discrete step, removing over-travel for better precision and repeatability.
Enables or disables the actuator quickly for safe transport, commissioning and servicing.
Real-time, high-accuracy position feedback for modern control systems.
A visible position check, even if electronic feedback is damaged or disconnected.
Machined throughout from metal components, built to last.
Technical data
CORE keeps specification simple with a cost-effective standard design for most applications. Choose ADVANCED when your duty calls for different materials, higher loads, longer strokes or bespoke controls and manual operation. Both use the same stepping principle and offer hydraulic or pneumatic supply.
Download the CORE and ADVANCED comparison (PDF)
| Property | HYSTEP CORE | HYSTEP ADVANCED |
|---|---|---|
| Cylinders | Carbon steel | 316L stainless steel |
| Nominal torque | 225 Nm at 4 bar | 50 Nm to 500 Nm |
| Steps per revolution | 18 | 12, 18 or 36 |
| Nut box | Compact | Compact or external high load |
| Stroke | Up to 5" | Up to 10" |
| Thrust | Up to 4,500 kgf | Up to 15,000 kgf |
| Manual operation | Carbon steel, top mount | 316L, top or side mount |
| Instruments | 316L, Advanced Actuators standard | 316L, Advanced Actuators standard or customer specification |
| Painting | Advanced Actuators offshore standard | Advanced Actuators offshore standard or custom |
| Best for | A cost-effective, ready-to-go choice for most applications and projects | Projects needing bespoke performance or enhanced capabilities |
| Property | HYSTEP |
|---|---|
| Supply | Pneumatic, 3 to 12 bar; or hydraulic, 50 to 300 bar |
| Operation | Electrical pulses converted to discrete mechanical steps by two solenoids |
| Holding | Holds position under load when external power is cut |
| Body | High-strength cast spheroidal graphite iron |
| Mounting | ISO 5211, with custom options |
| Durability | Chemically bonded to withstand 10,700 Nm, a safety factor of 21; six shear pins give 120% maximum torque resistance |
| Cycle testing | Mechanisms cycle tested to 1.75 million pecks |
| Ingress protection | IP66 and IP68, test certified |
| Ambient temperature | -30 °C to +80 °C |
| Tubing and fittings | 316L, with special materials available |
Sources: HYSTEP model comparison and features poster, July 2026, and HYSTEP flyer, Advanced Actuators; IP66 and IP68 test certificates. Specifications vary with configuration; each unit is confirmed when you order.
Control and feedback
HYSTEP takes our own instrumentation, so the actuator, feedback and positioner come from one supplier.
Position transmitter, A-HR
High-resolution position feedback for on-off and modulating valves.
Positioner, A-HC and A-HCR
Closed-loop positioning for modulating duties on hydraulic and pneumatic actuators.
In detail
Explore the complete assembly and the details that connect operation, mounting and position feedback. Select an image to view it larger.

3D model
Rotate, zoom and explode a representative HYSTEP to see the housing, cylinders, detent unit and indicator.
The model only loads when you ask for it.
Valves and applications
HYSTEP is widely used in the upstream oil and gas sector, especially on choke valves.
Choke valvesControl valvesWellheadsFlowlines
Hazardous area? Tell us the zone, gas group and temperature class, and we will confirm the certification for your exact unit.
Linear valve with continuous modulation? See HYLINE electro-hydraulic.
Precise choke control at the wellhead, onshore and offshore.
Incremental positioning on flowline, re-injection and gas lift chokes.
Compact, sealed stepping actuators for floating production.
Low consumption and holding without power, for sites that are hard to reach.
Certification
Certification depends on the specification, the components used and the area classification. Tell us what your project calls for and we will confirm the marks for your unit when we quote.









Downloads
Sizing help
Send the valve, the torque or thrust and stroke, and your supply, and we will recommend CORE or ADVANCED and the configuration.
Already installed
Overhaul, repair and spares for actuators in service, with commissioning support on site.
Size your HYSTEP
We just need three details.
Replacing one? Send the model code from the nameplate and a photo, and we will work from those.
Type and size, and the torque or thrust it needs.
Pneumatic or hydraulic, and the pressure.
Feedback needs, materials and the area classification.
Email us your detailsCall +44 (0)1535 655151
Prefer us to call you? Request a callback.
An actuator that moves a valve in small, fixed steps. HYSTEP converts electrical pulses into discrete mechanical movements using two solenoids, giving precise incremental positioning that holds when the power is cut.
CORE is a cost-effective standard specification, ready to go for most applications. ADVANCED is tailored to specific requirements, with greater flexibility in materials, stepping, loads, stroke, instruments and manual operation. Both are available with hydraulic or pneumatic supply.
Both are available: pneumatic from 3 to 12 bar, or hydraulic from 50 to 300 bar.
Yes. It maintains position under high load even when external power is cut.
Mainly choke valves in the upstream oil and gas sector: production wellheads, flowlines, re-injection, gas lift and FPSO vessels.
Mechanisms are cycle tested to 1.75 million pecks, and chemically bonded components withstand 10,700 Nm, with six shear pins for extra protection.
Our HYTRACK transmitter gives 4-20 mA and HART position feedback, and every unit has a built-in mechanical indicator.
Tell us the zone, gas group and temperature class, and we will confirm the certification for your exact unit before you order.